Argox X Series - Manual (Page 43)

43
printer languages.
Once “ENABLE” is
selected, printer
enters BACK
DISTANCE setting.
BACK
DISTANCE 10~40 mm 21 mm Available only when
BACK FEED is
enabled.
BASE
DARKNESS 0~99 (PPLA)
-28~28 (PPLB)
0 Available only in
PPLA and PPLB
printer languages.
ABS.
DARKNESS 0~30 0 To select darkness.
Available only in
PPLZ printer
language.
TRIM.
DARKNESS
-30~30 0 To fine-tune
darkness. Available
only in PPLZ printer
language.
BAUD RATE
(RS232) 600 / 1200 /
2400/ 4800 /
9600 / 19200 /
38400 / 57600 /
115200 9600 Should be as same as
setting of host.
PARITY
(RS232) NONE
EVEN
ODD
NONE Should be as same as
setting of host.
LENGTH
(RS232) 8 DATA BITS
7 DATA BITS
8 DATA BITS Should be as same as
setting of host.