ARRIS DG950 User Guide User Manual

Page 4

Advertising
background image

In areas of high surge events or poor grounding situations and areas prone

to lightning strikes, additional surge protection may be required (i.e.

PF11VNT3 from American Power Conver sion) on the AC, RF, and Ethernet

lines.

When the Data Gateway is connected to a local computer through Ethernet

cables, the computer must be proper ly grounded to the building/residence

AC ground network. All plug-in cards within the computer must be properly

installed and grounded to the computer frame per the manufacturer’s spec-

ifications.

Ensure proper ventillation. Position the Data Gateway so that air flows freely

around it and the ventillation holes on the unit are not blocked.

Do not mount the Data Gateway on surfaces that are sensitive to heat

and/or which may be damaged by the heat generated by the unit, its power

supply, or other accessories.

Touchstone DG950 Data Gateway User’s Guide

Safety

Getting

Started

Installation

Ethernet

Configuration

Usage

Troubleshooting

Glossary

4

Advertising