Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 45)

Hardware Preparation and Installation
ATCA-7368 Installation and Use (6806800M12D) 45
The blade must be connected to a TNV-2 or a safety-extra-low-voltage (SELV) circuit. A TNV-2
circuit is a circuit whose normal operating voltages exceed the limits for a SELV circuit under
normal operating conditions, and which is not subject to over voltages from
telecommunication networks.
Table 2-2 Power Requirements
Characteristic Value
Max. power consumption of ATCA-7368 145 W