Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 50)

Setup
ATCA-9405 Installation and Use (6806800M71G) 50
2.3.4.3 EJTAG Header
A separate 16-pin header is provided to access each Packet Processor EJTAG interface. The pin
assignment is shown below.
9 TMS
10 NC
11 SRESET#
12 GND
13 HRESET#
14 KEY
15 CKSTP_OUT#
16 GND
Table 2-19 COP Header Pin Assignment (continued)
Pin Signal
Table 2-20 EJTAG Header Pin Assignment
Pin Signal
1 TRST#
2 UART1_RXD
3 TDI
4 UART1_TXD
5 TDO
6 GND
7 TMS
8 GND
9 TCK
10 NC
11 RESET#
12 KEY