Artesyn ATCA-9405 Installation and Use (May 2014) - Manual (Page 51)

Setup
ATCA-9405 Installation and Use (6806800M71G) 51
2.4 ATCA-9405 Setup
Following items are required to setup and check the operation of the ATCA-9405:
 ATCA chassis and power supply
 Console cables for EIA-232 ports (Cisco style pin out)
 Computer terminal
Save the antistatic bag and box for future shipping or storage.
13 NC
14 Target Power
15 NC
16 NC
Table 2-20 EJTAG Header Pin Assignment (continued)
Pin Signal
The standard EJTAG connector has only 14 pins, thus do not connect to pin 15 and 16.