Artesyn COMX-P1022 Installation and Use (July 2014) - Manual (Page 35)

Hardware Preparation and Installation
COMX-P1022 COM Express Module Installation and Use (6806800M04C) 35
2.1.3 Power Requirements
2.2 Unpacking and Inspecting the Module
Table 2-3 Board Power Supply Current Requirements
0.75V 1.0V 1.2V 1.5V 1.8V 2.5V 3.3V
CPU(P1022) 6000 1000 100 200
DDR3 600 4400
USB PHY(3315) 55
USB HUB(2514) 415
GE PHY BCM5482 260 88
DS90C385 493
TFP410PAP 250
74LVCH32244A x2 120
Total 23.17W 0.45W 6W 3.12W 8.1W 0.5W 5W
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the product can damage
circuits or shorten its life.
Before touching the product make sure that you are working in an ESD-safe environment or
wear an ESD wrist strap or ESD shoes. Hold the product by its edges and do not touch any
components or circuits.