Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 67)

BIOS
NITX-300-ET-DVI Installation and Use (6806800N97B) 67
Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support
if no USB devices are connected. Disable option will keep USB
devices available only for EFI application. Default is "Enabled".
EHCI Hand-off This is a workaround for OSes without EHCI hand-off support. The
EHCI ownership change should be claimed by EHCI driver. Default
is "Enabled".
Mass Storage Devices: List the attached Mass Storage Devices.
Table 5-11 LM80 H/W Monitor
Field Description
CPU_VCORE Monitor the CPU VCORE voltage
VCC0_89 Monitor the VCC 0.89V
VCC1_05 Monitor the VCC 1.05V
VCC1_2 Monitor the VCC 1.2V
VCC1_8 Monitor the VCC 1.8V
VCC3_3 Monitor the VCC 3.3V
VCC5 Monitor the VCC 5V
Table 5-12 EMC2103 H/W Monitor
Field Description
CPU Temperature CPU Temperature
Board Temperature Board Temperature
CPU Fan Speed CPU Fan Speed
CPU Fan Duty Cycle CPU Fan Duty Cycle
Automatic Fan Control Enable/Disable automatic fan control in the EMC2103. Default is
"Enabled".
Table 5-10 USB Configuration (continued)
Field Description