Artesyn NITX-300-ET-DVI Installation and Use (August 2014) - Manual (Page 76)

BIOS
NITX-300-ET-DVI Installation and Use (6806800N97B) 76
5.5 POST Codes
5.5.1 Status Code Ranges
Save Changes Save Changes made so far to any of the setup options.
Discard Changes Save Changes done so far to any of the setup options.
Restore Defaults Restore/Load Defaults values for all the setup options.
Save as User Defaults Save the changes done so far as User Defaults.
Restore User Defaults Restore the User Defaults to all the setup options.
Boot Override The options will override the boot orders in 'Boot' menu. So you can freely
select the device which you want to boot.
Table 5-22 Save and Exit Menu Field Description (continued)
Field Description
Table 5-23 Status Code Ranges
Status Code Range Description
0x01 - 0x0F SEC Status Codes & Errors
0x10 - 0x2F PEI execution up to and including memory detection
0x30 - 0x4F PEI execution after memory detection
0x50 - 0x5F PEI errors
0x60 - 0xCF DXE execution up to BDS
0xD0 - 0xDF DXE errors
0xE0 - 0xE8 S3 Resume (PEI)
0xE9 - 0xEF S3 Resume errors (PEI)
0xF0 - 0xF8 Recovery (PEI)
0xF9 - 0xFF Recovery errors (PEI)