Artesyn NITX-315/NITX-315-ET Installation and Use (August 2014) - Manual (Page 91)

BIOS
NITX-315/NITX-315-ET Installation and Use (6806800L71D) 91
5.5.2 Standard Status Codes
5.5.2.1 SEC Status Codes
0xF9 - 0xFF Recovery errors (PEI)
Table 5-26 Status Code Ranges (continued)
Status Code Range Description
Table 5-27 SEC Status Codes
Status Code Description
0x0 Not used
Progress Codes
0x1 Power on. Reset type detection (soft/hard).
0x2 AP initialization before microcode loading
0x3 North Bridge initialization before microcode loading
0x4 South Bridge initialization before microcode loading
0x5 OEM initialization before microcode loading
0x6 Microcode loading
0x7 AP initialization after microcode loading
0x8 North Bridge initialization after microcode loading
0x9 South Bridge initialization after microcode loading
0xA OEM initialization after microcode loading
0xB Cache initialization
SEC Error Codes
0xC - 0xD Reserved for future AMI SEC error codes
0xE Microcode not found
0xF Microcode not loaded