Artesyn NITX-315/NITX-315-ET Installation and Use (August 2014) - Manual (Page 97)

BIOS
NITX-315/NITX-315-ET Installation and Use (6806800L71D) 97
0x78 ACPI module initialization
0x79 CSM initialization
0x7A Reserved for future AMI DXE codes
0x80 OEM DXE initialization codes
0x90 Boot Device Selection (BDS) phase is started
0x91 Driver connecting is started
0x92 PCI Bus initialization is started
0x93 PCI Bus Hot Plug Controller Initialization
0x94 PCI Bus Enumeration
0x95 PCI Bus Request Resources
0x96 PCI Bus Assign Resources
0x97 Console Output devices connect
0x98 Console input devices connect
0x99 Super IO Initialization
0x9A USB initialization is started
0x9B USB Reset
0x9C USB Detect
0x9D USB Enable
0x9E - 0x9F Reserved for future AMI codes
0xA0 Reserved for ASL (see ASL Status Codes section below)
0xA1 IDE initialization is started
0xA2 IDE Reset
0xA3 IDE Detect
0xA4 IDE Enable
0xA5 SCSI initialization is started
0xA6 SCSI Reset
0xA7 SCSI Detect
Table 5-30 DXE Status Codes (continued)
Status Code Description