Artesyn System Services Framework Installation and Use (November 2014) - Manual (Page 49)

SSF Installation
System Services Framework Installation and Use (6806800S58E) 49
In the RPM command above, the string <Application Agent> should be replaced with the
application agent of the application, which has to be accessed using SSF. The strings <Blade>,
and <version> should be replaced with the blade name on which application is installed and
with version number of the SSF respectively. For example, in order to access ViewCheck
installed on ATCA-7370 blade, then the RPM is:
rpm -ivh ssf_diagnosticsTLS_rel-7370-1.0.19.x86_64.rpm
After the installation, all SSF application agent binary and configuration files are installed on
the blade at the /opt/ssf location.
3.3.5 Upgrade Procedure on External Linux PC
This section explains how to upgrade the package from one release version to another release
version on the Linux OS distribution:
1. CentOS release 5.9 on 32-bit platform
2. CentOS release 6.3 on 32-bit platform
3. CentOS release 6.4 on 32-bit platform
4. Red Hat Enterprise Linux Server release 5.5 on 32-bit platform
Table 3-6 Directory Structure of SSF Application Agent
Folder Description Files
/opt/ssf/bin
This folder contains binaries of SSF
Application Agent.
ssf<ApplicationAgent>
.
For example, ssfsrsd is the
application agent for
SRStackware.
/opt/ssf/etc/con
fig/<Application
Agent>/
This folder contains application agent
configuration files, if any application
is installed on the blade. For more
information, see
SSF Application Agent
Configuration on page 65 .
S99Ssf<ApplicationAgent
>.sh
ssfApi.log
ssfApi.conf
ssf_<ApplicationAgent>_
instances