Artesyn ViewCheck on ATCA-9405 Installation and Use (September 2014) - Manual (Page 72)

Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51E) 72
4.4.4 set-poll-interval
set-poll-interval
command is used to set the Poll interval value for monitors.
Syntax for CLI
set-poll-interval monitorId <Monitor ID> deviceInstance <Dev
Instance> pollInterval <PollIntervaLvalue>
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>SP_VEE0-{Dev Cat}</Name>
</Object>
<Method>setPollInterval</Method>
<Argument>
<Name>deviceInstance</Name>
<Value>Dev Instance</Value>
</Argument>
<Argument>
<Name>monitorId</Name>
<Value>Monitor ID</Value>
</Argument>
<Argument>
<Name>pollInterval</Name>
<Value>PollInterval Value</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the set-poll-interval command arguments.
Table 4-19 set-poll-interval
Argument Data Type Description
Monitor ID Integer Type the unique ID of the Monitor for which you want to
set the Poll interval value