Artesyn ViewCheck on ATCA-9405 Installation and Use (September 2014) - Manual (Page 77)

Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51E) 77
<Value>Monitor ID</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the show-rate command arguments.
4.4.9 show-networkcounter-log
show-networkcounter-log
command displays the list of network counters on devices
that have crossed the maximum rate value. For more information on command, rate, refer
show-rate on page 76 .
Syntax for CLI
show-networkcounter-log
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>SP_VEE0-{Dev Cat}</Name>
</Object>
<Method>showNetworkCounterLog</Method>
</InvokeMethod>
</Script>]]>]]>
Table 4-23 show-rate
Argument Data Type Description
Monitor ID Integer Type the unique ID of the Monitor of which rate of
change value is to be shown
Dev Instance Enum Use list-device-instances CLI command to get the
equivalent enumerated value of supported Device
Instance