Driftwood log set “b” installation instructions – Avalon Firestyles Driftwood Log Set B User Manual
Page 2
Advertising
Driftwood Log Set “B”
Installation Instructions
(sku 94500572)
Page 2 of 10
17601711 - 7/16/12
© Travis Industries, Inc.
Preparing the Burner
Remove the two screws holding the burner in place (see below). Grasp the burner with both hands and lift it
straight up and out of the firebox. Place the burner on a suitable work surface.
Remove and discard the side air deflector. Replace the screws.
NOTE: On older burners the deflector is riveted in place. Simply bend the extension repeatedly until it
snaps off.
NOTE: This applies to the 33 DVI / DVL / Cypress models.
Advertising