Avalon Firestyles Driftwood Log Set B - Manual (Page 6)

Driftwood Log Set “B”
Installation Instructions
(sku 94500572)
Page 6 of 10 17601711 - 7/16/12 © Travis Industries, Inc.
Place the right front log as shown below. Note how the two pins on the burner insert into the holes on the log.
Special Instructions for Pilot Shield
Most units have a pilot shield that contacts the bottom of the front right log (older 33 DVI’s do not).
Place the log in place and press down on it firmly until the log sits flat (this may indent the bottom of the log).
Be careful to not damage the log or press too firmly. When in place, the log should be spaced approximately
3/8” above the burner surface (see photo below). Make sure the pilot is visible and is able to light the burner.