Fyre-stones set “c” installation instructions – Avalon Firestyles Fyre-Stones Set C User Manual
Page 12
Advertising

Fyre-Stones Set “C”
Installation Instructions
(sku 94700764)
Page 12 of 14
17601709 - 7/17/12
© Travis Industries, Inc.
1. Starting in the left rear corner, place the stones in a clockwise manner on the stone grid, paying close
attention to the notch/tab alignment and making sure the numbers face the rear of the firebox. The stone
placement sequence is shown below.
NOTE:
33 DVI / DVL GSR NB: This is Stone #5.
Cypress / 864 HO NB: This is Stone #1.
2. Place the pilot stone (#20) on the pins in the right center of the firebox, as shown below.
The pilot stone is shown below as an example (the pilot stone also has an indentation that allows room for the
pilot light).
Advertising