Fyre-stones set “c” installation instructions – Avalon Firestyles Fyre-Stones Set C User Manual
Page 5
Advertising

Fyre-Stones Set “C”
Installation Instructions
(sku 94700764)
Page 5 of 14
17601709 - 7/17/12
© Travis Industries, Inc.
5. Remove and discard the side air deflector. Replace the screws.
33 DVI / DVL / Cypress: On older burners the deflector is riveted in place. Simply bend the extension
repeatedly until it snaps off.
6. 33 DVI / DVL / Cypress: Remove and discard both rear log supports and rear air deflector. Keep the screws.
IMPORTANT: 864 HO: You must retain the rear air deflector.
7. Follow the directions on the following pages to prepare the burner for your heater model.
IMPORTANT: You must use the stone grid brackets supplied with this kit.
Advertising