Avalon Firestyles GreenStart Igniter 2 for Freestanding Stoves User Manual
Page 20
GreenStart Igniter 2 for Freestanding Stoves
Installation Instructions
(SKU 94400951)
Page 20 of 27
17601769.docx — 12/11/13
© Travis Industries, Inc.
Endeavor Installation, continued
5. Attach the igniter with gasket to the igniter sleeve using the screws and gasket included in this kit.
Note that the igniter gasket is placed between the sleeve and igniter assembly.
NOTE: These instructions show the compressor assembly attached to the back of the stove. Alternatively,
you may place it on the floor near the stove. See the Cape Cod model installation instructions for details.
6. Remove and discard the cover plate from the compressor assembly.
7. Remove the mounting brackets from the compressor assembly. Re-attach them to the top of the
compressor assembly.
NOTE: Each bracket is side-specific. Make sure to keep the brackets on the same side.