Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 47)

S e t t i n g t h e W o r d L e n g t h
Word length specifies the number of bits the printer uses to define a character.
To access this setting, from the Main Menu select Setup, Serial Comm. Then, follow
these steps.
1.
Press  or  until you see Word Length.
2. Press CHANGE to highlight the word length options. The current setting is shown.
3. Press  or  to scroll through the word length options.
8
CHANGE BACK
SERIAL COMM
Word Length
← 8 →
SET CANCEL
SERIAL COMM
← Word Length →
4. When you see the word length you need, press SET to save the change. Press
CANCEL
to leave the word length unchanged.
5. Press BACK until you return to the Home/Online screen.
8
CHANGE BACK
SERIAL COMM
← Word Length →
Setting Communications 5-3