Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 73)

D e l e t i n g a S c r i p t
You can delete a script from the printer's memory.
From the Main Menu select Scripts, then follow these steps.
To delete a script:
1. From the Script Menu, press  or  until you see Delete Script.
SCRIPTS
←Delete Script→
ENTER BACK
2. Press ENTER to start the script deletion process.
SCRIPTS
Are You Sure?
← Yes →
ENTER BACK
3. Press  or  to display either Yes or No. Selecting "Yes" deletes the script.
Selecting "No" leaves the script on the printer.
4. When you see the script deletion setting you need, press ENTER to save the change.
Press BACK to leave the script deletion setting unchanged.
Note: The flash memory used by the script is not available for other scripts or fonts
until the flash memory is reformatted. However, when you format flash memory,
you must resend the script and any downloaded fonts to the printer.
5. If “Yes” was selected, the printer automatically returns to the Home/Online.
Script
Online
FEED TLABEL MENU
If “No” was selected, press BACK until you return to the Home/Online screen.
SCRIPTS
Are You Sure?
No
ENTER BACK
Using Scripts 7-5