Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 85)

P a u s i n g a B a t c h
Press PAUSE to interrupt printing. You may want to interrupt a batch to make
adjustments for:
 Loading a different roll of supply or a ribbon. See Chapter 2, " Loading Supplies " or
Chapter 3, " Loading Ribbon " for more information.
 Adjusting the supply position or contrast using the Setup menu. See Chapter 4,
"
Setting Supply Options " for more information.
When you press PAUSE, the following is on the display:
Press ENTER to resume printing or press  or  to display the Pause Menu options.
The following chart shows the Pause Menu options.
Printing 9-3
P a u se M e n u
Cancel
Batch Cancel
All Resume
Printing Restart
Batch
R e s t a r t i n g a B a t c h
To reprint a paused batch from the beginning (using the original quantity), follow these
steps.
1. Press  or  until you see Restart Batch.
2. Press ENTER to print the current batch from the beginning. Press BACK to resume
printing.
C a n c e l i n g a P a u s e d B a t c h
To cancel a batch, press ESCAPE anytime while the batch is printing or press PAUSE
and follow these steps.
1. Press PAUSE to interrupt printing.
2. Press  or  until you see Cancel Batch.
ENTER BACK
PAUSE MENU
← Restart Batch →
ENTER BACK
PAUSE MENU
← Cancel Batch →
ENTER BACK
PAUSE MENU
← Resume Printing →
3.
Press ENTER to cancel the current batch.