Avery Dennison 6037 Rev. AA 3/04 Programmer Manual - Manual (Page 113)

ROM-DOS Internal Commands 4-71
ROM-DOS displays the time according to the 24-hour clock with the a or
p indicator to show AM or PM. The AM / PM indicator can be entered as
a or p or as am or pm. The time may be entered in a 24-hour format or a
12-hour format with the AM or PM designators.
The allowed options for hours and minutes are
hh = 0-24 mm = 0-59 indicator = a, p, am, or pm
ROM-DOS displays time to hundredths of seconds. When entering time,
however, you needn’t enter seconds or hundredths; ROM-DOS assumes a
value of zero if they are not specified.
You may skip the display and prompting by typing the current time after
the word TIME on the command line
TIME 23:24
ROM-DOS accepts your entry as the current time.
Example s
To set the time to 11:15 p.m., enter
TIME 23:15 or TIME 11:15 p
To set the time to 9:26 a.m., enter
TIME 9:26 or TIME 9:26 am