Avery Dennison 6037 Rev. AA 3/04 Programmer Manual - Manual (Page 165)

Utility Descriptions 5-45
Ctrl+I Insert tab (same as Tab)
Ctrl+J Page down
Ctrl+K Toggle block mode (for cutting to clipboard)
Ctrl+L Delete the entire line
Ctrl+M Insert return (same as Enter)
Ctrl+N Toggle insert/overwrite mode
Ctrl+O Open a file
Ctrl+P Toggle through previous 3 positions
Ctrl+Q Home
Ctrl+R Search/Replace
Ctrl+S Right arrow
Ctrl+T Top of document
Ctrl+U Page up
Ctrl+V Insert clipboard at cursor
Ctrl+W Up arrow
Ctrl+X Delete to clipboard
Ctrl+Y End of document
Ctrl+Z Down arrow
Ctrl+[ Menu/Cancel operation (same as Esc)
Ctrl+] Brace match
Ctrl+\ Do a command (opens a menu with all NED
commands)
Troubleshooting Remote NED
If nothing appears on the terminal screen, check the baud rate of the
terminal program, check the serial cable (it should norma lly be a null-
modem cable), and check that the terminal program is set to emulate
ANSI escape codes.
In some cases, it is possible for the remote auto-detect to fail. In this
case, run the program NEDREMOT prior to running NED. NEDREMOT
sets a word at 40:E8h to inform NED to operate remotely.