Avery Dennison 9840 Technical Reference Manual - Manual (Page 146)

7-28 MonarchNet for NDS
Printing in NPrinter Mode:
1. Install the print server hardware and connect the cabling. (If unfamiliar
with how to do this see the Hardware Installation User’s Guide.)
2. Create an Monarch Print Server object. (If unfamiliar with how to do this
see Creating a New Monarch Print Server Object.)
3. Open the Monarch Print Server object dialog.
4. Select or Create a NetWare Print Server objectfrom the Assignments
page.
5. Choose a port to configure from the Assignments page, then select
Assign.
6. Select or Create a NetWare Printer object from the Printer/Queue
Assignments dialog.
7. Select or Create a NetWare Print Queue object from the Printer/Queue
Assignments dialog.
8. Select OK to save your printer and queue selections.
9. From the Assignments page, select OK to save changes to the Monarch
Print Server object.
10. From the file server console, restart the PSERVER application.
You should now be able to submit jobs to the queue and receive jobs on the
specified printer(s).