Avery Dennison RFID - Manual (Page 19)

HowToRFID
Revision: 13 Date: 31 August 2009
Page 19 of 53
2.5 Using a cutter
There is a limitation by moving not more than 48 mm backwards for 64-0x and 17 mm for AP 5.4. For relevant
antenna positions in different machine/printer types see 2.4.4
This limitation must be considered if labels with a non-optimal inlay placement shall become processed. The inlay
must be placed behind the optimal position (away from top of label) to prevent additional back feeding for reaching
the RFID operation position. The optimal inlay position depends from the printer type and the inlay itself. Optimal
placement data for most common inlays is available on request.
Printer type Distance dotline / cutter
AP 5.4 17.00 mm
64 series 17.15 mm
Table 6 – Distances between dot line of print-head and cutter (cut line)