Avery Dennison RFID - Manual (Page 3)

HowToRFID
Revision: 13 Date: 31 August 2009
Page 3 of 53
Revision Date Author Changes
12 2008-09-22 R. Boettcher Section 3.3.2.1: List of approved AWID Firmware versions updated
Section 1.1: added “PEM” in the list of RFID enabled systems
Section 2.3: added part numbers for PEM / HF RFID kits
Section 2.4.4 “Using pre qualified supplies”: added a reference to the “RFID
Label Design & Printer Setup Guide” and the RFID inlay qualification process
Section 4.2 "Inlay qualification” added
Updated features list for printer firmware version Vx.34
Several sections: added transponder fields “AFI” and “DSFID” in field
descriptions; feature lists and command descriptions
Section 5.3.4.1: description of #SRF command; optional use of the size
parameter for reading the TID, MEMBANK field
Section 2.4.6: description of the new write based hotspot-/profile test of firmware
version >= X.34
13 2009-08-31 R. Boettcher Finalization of changes introduced in revision 12 (no significant changes of
content)