Aviosys 9258S - Manual (Page 19)

IP POWER 9258 USER MANUAL
- 18 -
IP address Settings: Ethernet (LAN) and Internet
- IP Address: please type in the IP address provided by your ISP. If IP Power 9258 is working
with a Router, please refer to the network settings of the Router.
 Local Area Network (LAN):
In LAN, you can set a fixed IP address or gain it from a DHCP server automatically. We
recommend you use a fixed IP address so you can access the 9258 through the internet.
Now type the new IP address in the address field of IE, you can visit the 9258. You also can use
the ipedit.exe to find the IP Power 9258 and modify its IP address.
 Work on Internet :
User can set the IP provided by your ISP. If the IP Power 9258 has a public IP address,
you can control it through the Internet. IP Sensor 9258 supports fixed IP, DHCP.
- Subnet Mask: please type in the Subnet Mask provided by your ISP. If IP Power 9258 is
working with a Router, please refer to the network settings of the Router.
- Default gateway: please type in the Default Gateway provided by your ISP. If IP Power 9258 is
working with a Router, please refer to the network settings of the Router.
- DNS Server: please fill in the IP address of DNS server. If you are in Taiwan, you can set it to
168.95.1.1.
- DHCP : Enable
– activate DHCP service. DHCP will assign IP address for each PC.
Disable – shut down the DHCP service. You can set the IP address by yourself.
- Beeper: Enable – activate the beeper. Disable – turn off the beeper.
If you control the 9258 through the web page, the beeper will beep once when
the operation works.
- Http Command : Setup the control possibility from HTTP command or SDK
1. Select Enable: To enable Http command & SDK control
2. Select Disable: To disable Http command & SDK control
- Switch Interval: Support delay 0~120 Seconds to delay the On/Off action as manually control.
- Device Name : User can setup the device name
NOTICE:
1) IP address format: XXX.XXX.XXX.XXX:YYYY YYYY means the port number,
(I.E 192.168.1.100:2345)
Port ranges from: 1 to 32767
.
2) Subnet Mask: Ranges from 0 to 254 ( xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254 )
3) If DHCP is disabled, then the user must set the TCP Port and default Gateway .If
DHCP is enabled, then the TCP port will be preset to 80( xxx.xxx.xxx.xxx:80 ) and the
default gateway will be set by the DHCP server.
2.) DDNS Settings
Please refer to page 23 for more details