Aviosys 9258DS - Manual (Page 25)

- 25 –
Ref: DS9258Y90M02
Ping
The Auto-ping functionality allows the 9258 DS to check if the device have malfunctioned or needs to be
restarted. If the device is no working correctly the 9258 Ping will activate the action that you have selected
to reinstate the state of the device
Outlet: A description of which on let to use Ping function
Enable: Disable or Enable ping settings
Ping Address: Specify the IP Address to Ping
Ping Failures: The number of ping failures before the Action is activated.
Action Delay (Seconds): When Ping Failures is reached the number of seconds delay before action is
activated.
(I.E some systems or computers that require a shut down time)
Startup Delay (Seconds): The number of seconds it takes the attached devices to startup. Once those
devices start, the Start up Action will be activated to continue pinging or stop pinging.
Start up Action: After start up Delay has been reached the start up action will either Continue Pinging or
Stop Pinging
Action: When the number of Ping Failures have been reached. The 9258 will either
Ping Time Interval (Seconds): The number of seconds between each ping
Ping Response Time (Milliseconds): The number of milliseconds the device will wait for a response from
the pinged device if no ping is detected within this time it will be considered a ping failure.
Please view the example below for more details: