Setup, Demo – Aviosys 8840 Manual User Manual
Page 13
13
For Example :
Setup
“ ON: 00:00:05 “ + “ OFF : 08:00:00 “ + Repeat
Means that it turn ON in 5 seconds ( Aa NO
– connect ), and turn off after 8 hours
( As NO
– Disconnect ) ,then repeat this action.
Note : Please do nto setup Scheudle & Stop Watch on same port .
Setup
In Setup section , user can change the name of each output , and also assign the
ON/OFF status after 8840 power reboot by enable “Save power status”.
If select
“ Save power status” , the outlets status will be the last status as device power off.
If no select
“ Save power status” , the outlets status will be the default status as device power
turn ON to ON ( All LED light turn ON as device power ON ) .
Demo
Choose Demo mode , user can setup turn ON by sequence or at the same time .