Aviosys 8840 Manual - Manual (Page 9)

9
your hard disk .
 Software : USB Power 8840.exe
 8840 Driver: USB Net Power Driver .
5. Connect the 8840 power and the USB port of 8840 power to PC . PC will show
up “ Detect New Hardware” , then select the 8840 driver and install .
6. After install the driver, you can get “Aviosys Port (COM X) in Ports (COM&
LPT) device manager as following .
Control Panel  System  Device manager  Ports(COM& LPT)  Aviosys Port (COM X)
4.) After confirm the 8840 had shown in Device Manager , please execute the software
“USB Power 8840.exe “ and you will get as following :