Baumatic BHI660BE - Manual (Page 15)

Switching the hob off
Once you have switched off all of the cooking zones, you should switch
the hob off.
o
Press the ON/OFF button.
o
It is possible to turn the hob off at any time by
pressing the ON/OFF button.
Residual heat indicator
o
After a zone is switched off, the
corresponding cooking zone indicator will
show a letter “H”. This m ean s that the
temperature of the zone is over 60°C and is
therefore still high enough to cause injury.
o
IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut. Care should be taken in case the surface
temperature is still high.
Pan sensor
Each zone has a sensor on it, so it can detect the presence of a pan.
o
The sensor is fine-tuned to detect a pan being placed on it. The
pan should be one size smaller than the nominal diameter of the
zone.
o
If after placing a pan on a cooking zone and
selecting that cooking zone, a “U” shaped symbol
appears on the cooking zone indicator, this means
that the pan is either the incorrect size or shape.
Or it could be made from a material that is
inappropriate for use on an induction zone hob.
o
If a cooking zone is selected but no pan is detected, the pan
sensor system will check for the presence of a pan
approximately every few seconds. If no pan is detected after 1
minutes the hob will automatically switch off
o
You should check that your pans are suitable for use on an
induction zone hob (see the pan manufacturer’s trademark or
instructions).
15