Before use : cleaning, Presentation of the breast pump (see appendix i), Cleaning and sterilising – Bebe Confort Natural Comfort Electric Breast Pump User Manual
Page 17: Appendix ii, Appendix v
17
2- Presentation of the breast pump (see appendix I)
A.
Breast pump
J.
Flexible internal shield
S.
Container for sterilisation
B.
Lid
K.
Charger
T.
Replacement parts kit
C.
Bottle ring
L.
Power cable
U. Transport bag
D.
White o-ring
M.
Nozzle
E.
Transparent diaphragm
N. Teat + Bottle ring
1.
On/Off button
F.
One-way valve
O.
Bottle cover
2.
Rinsing button
G.
140ml Natural Comfort bottle
P.
Sealing disk
3.
Stimulation button
H. Tube
Q. Top for sterilisation
4. Suction buttons (x4)
I.
Rigid external shield
R.
Lid for sterilisation
3- Cleaning and sterilising
Before use : cleaning.
See the cleaning chart in
appendix II
.
After use : rinsing and sterilising the tube and nozzle.
See
appendix V
and
VI
.
1. Store away the milk you have collected, ensuring you follow the instructions given below.
2. Place an empty bottle (G) assembled with (B + C + D + E + F) in the breast pump.
3. Separate the tube (H) and nozzle (M) from the shield (I + J).
4. Place the free end of the tube (H) in a container of
cold water (At least 150ml of drinking water).
5. Press the rinse button (2) on the breast pump (cycle lasts around 30 seconds).
6. Once the automatic rinse cycle is complete, remove the tube (H) and separate all the parts of the breast pump.
7. Throw away the rinse water which has collected in the bottle.