Beisler 2111-4 - Manual (Page 23)

- B 23 -
Short Seam Automat 2110-4 / 2111-4 Working Instructions Beisler Automated Sewing Equipment
B.3
Operation
B.3.9 Aligning sewing pieces
The line-up positions of pocket edge, pocket bag and label
must be aligned to one another.
1. Fig. 12: Mark the exact position 7 of the pocket
bag 8 at the line-up station with tape or pen.
2. Align the line-up position of the pocket edge with the
position of the pocket bag.
Mark the line-up position 3 of the pocket edge 2 on
the pick-up plate with tape or pen.
3. Align the reticle 5 of the guide laser 1 with the desi-
red position of the label 6.
Fig. 13: If the machine is equipped with the optional
automatic label feed system 1, a folded label 3 must
be inserted into the magazine 2.
4. Set the desired stitch width on the pocket edge using
the handwheel 4.
NOTE - Stitch width!
The stitch width depends on the thickness of the fabric.
The thicker the fabric, the larger the stitch width. The
correct stitch width for the fabric used is determined by per-
forming several machine cycles.
Fig. 12/13
Fig. 12
Fig.13
3
4
2
1
7 6 5 8
3
2
1