Belshaw Adamatic TG50 Thermoglaze User Manual
Page 36
Belshaw Bros., Inc.
• www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
30 MN-1720WM Thermoglaze
SERVICE BULLETIN SB-0361
This is a maintenance advisory for all owners of Thermoglaze TG-25 and TG-50 machines.
Belshaw has recently been informed of conveyor chain binding and/or failures on these machines. We
have addressed the problem by inspecting machines during assembly, and by testing and inspecting chains
returned to us from the field.
We have concluded that almost all of these problems can be avoided if the recommended maintenance
procedures from the manual be strictly adhered to.
A label (TG-9031) is included with this service bulletin and it should be placed on your machine in a
prominent area that will easily remind all employees of the necessity to maintain and clean this
equipment
. Please note – equipment failure caused as a result of not following
these maintenance and cleaning instructions will not be covered under
warranty.
Specifically – The conveyor
MUST be removed from the
unit and thoroughly cleaned
with water and a mild
detergent to remove all glaze,
and any other contaminants,
DAILY. See manual for more
information.