Beurer BM 44 - Manual (Page 15)

15
Manufacturer
Storage
RH ≤90% -20°C
55°C
Permissible storage temperature and hu-
midity
Operating
10°C
40°C
RH ≤90%
Permissible operating temperature and
humidity
Keep dry
SN Serial number
0483
The CE labelling certifies that the product
complies with the essential requirements
of Directive 93/42/EEC on medical prod-
ucts.
Advice on use
• In order to ensure comparable values, always measure
your blood pressure at the same time of day.
• Before every measurement, relax for about five minutes.
• If you want to perform several measurements on the same
person, wait five minutes between each measurement.
• Do not take a measurement within 30 minutes after eating,
drinking, smoking or exercising.
• Repeat the measurement if you are unsure of the meas-
ured value.
• The measurements taken by you are for your information
only – they are not a substitute for a medical examination!
Discuss the measurements with your doctor, and never
base any medical decisions on them (e.g. medicines and
their administration)!
• Do not use the blood pressure monitor on newborns,
pregnant women or patients with preeclampsia.
• Cardiovascular diseases may lead to incorrect measure-
ments or have a detrimental effect on measurement ac-
curacy. The same also applies to very low blood pressure,
diabetes, circulatory disorders and arrhythmias as well as
chills or shaking.
• The blood pressure monitor must not be used in connec-
tion with a high-frequency surgical unit.
• Only use the device on people who have the specified up-
per arm measurement for the device.
• Please note that when inflating, the functions of the limb
in question may be impaired.
• During the blood pressure measurement, blood circulation
must not be stopped for an unnecessarily long time. If the
device malfunctions, remove the cuff from the arm.
• Avoid any mechanical restriction, compression or bending
of the cuff line.