Beurer BM 44 - Manual (Page 24)

24
ments for the safety and essential performance of auto-
mated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.
9. Mains part
Model no. FW 7575M/EU/6/06
Input 100 – 240 V, 50 – 60 Hz
Output 6 V DC, 600 mA, in connection with Beurer
blood pressure monitor
Supplier Friwo Gerätebau GmbH
Protection This device is double insulated and pro-
tected against short circuit and overload by
a primary thermal fuse. Make sure to take
the batteries out of the compartment before
using the mains part.
double insulated / equipment class 2
Polarity of the the DC voltage connection
Enclosures
and Protective
Covers
Equipment enclosed to protect against
contact with live parts, and with parts which
can become live (finger, pin, hook test).
The operator shall not contact the patient
and the output plug of AC mains part simul-
taneously.