Beurer BM 45 User Manual

Page 18

Advertising
background image

18

• Cardiovascular diseases may lead to incorrect measure-

ments or have a detrimental effect on measurement ac-

curacy. The same also applies to very low blood pressure,

diabetes, circulatory disorders and arrhythmias as well as

chills or shaking.

• The blood pressure monitor must not be used in connection

with a high-frequency surgical unit.

• Only use the device on people who have the specified upper

arm measurement for the device.

• Please note that when inflating, the functions of the limb in

question may be impaired.

• During the blood pressure measurement, blood circulation

must not be stopped for an unnecessarily long time. If the

device malfunctions, remove the cuff from the arm.

• Avoid any mechanical restriction, compression or bending of

the cuff line.

• Do not allow sustained pressure in the cuff or frequent meas-

urements. The resulting restriction of the blood flow may

cause injury.

• Ensure that the cuff is not placed on an arm in which the

arteries or veins are undergoing medical treatment, e.g. intra-

vascular access or therapy, or an arteriovenous (AV) shunt.

• Do not use the cuff on people who have undergone a mas-

tectomy.

• Do not place the cuff over wounds as this may cause further

injury.

• You can either use the blood pressure monitor with batteries

or with a mains part. Please note that data transfer and data

storage is only possible when your blood pressure monitor is

supplied with power. As soon as the batteries are empty or

the mains part is disconnected from the power supply, the

blood pressure monitor loses the date and time.

• To conserve the batteries, the monitor switches off automati-

cally if no buttons are pressed for 3 minutes.

• The device is only intended for the purpose described in

these instructions for use. The manufacturer is not liable for

damage resulting from improper or careless use.

Storage and Care

• The blood pressure monitor is made up of precision electron-

ic components. Accuracy of readings and the instrument’s

service life depend on careful handling.

– You should protect the device from impact, moisture, dirt,

major temperature fluctuations and direct exposure to the

sun’s rays.

– Never drop the device.

– Do not use near strong electromagnetic fields, i.e. keep it

away from any radio systems and mobile phones.

– Only ever use the cuffs provided with the monitor or origi-

nal replacement cuffs. Otherwise erroneous results will be

recorded.

• Do not press any buttons until the cuff is in position.

• If the instrument is not used for any length of time, we

recommend removing the batteries.

Advice on batteries

• If your skin or eyes come into contact with battery fluid, flush

out the affected areas with water and seek medical assi-

stance.

Advertising