Beurer PM 62 - Manual (Page 42)

41
13.2 Installation of the software
To install the software, please pay attention to printed instructions or
to the file "Install_Readme" on the enclosed CD. Please follow the
instructions carefully to install the software exactly and in the order
specified.
1. Place the CD-ROM supplied in the drive and choose the CD
drive in Windows Explorer or on the desktop of your PC.
2. Double-click the "setup.exe" file to run it.
3. Choose your language and follow the installation instructions.
Confirm with "Next" or "Install" as appropriate.
4. When you click "Finish", the software starts.
5. Enter your personal settings and details under "New registra-
tion" in the EasyFit program and click "Save" or "Next" to con-
firm.
13.3 Data transfer
1. Start EasyFit.
2. Create a new person or click on an existing account.
3. Go to "Data Manager" and click the "Transfer data" button.
4. Connect the PC clip to the heart rate monitor and after that con-
nect the USB plug to the USB port of your PC.
5. After successful data transfer your training data can be viewed in
the menu "Training", "Data Manager" or can be called up indi-
vidually in the calendar.
NOTE: Do not turn off the PC or unplug the USB connector during
uploading of the measured data.
FURTHER INFORMATION
Should you have any questions concerning the use of the EasyFit
Software please call customer service at toll-free 1-800-536-0366 or
email [email protected].