Blu Bathworks LF1062 - Manual (Page 10)

2014-01
1 866 907 0122 blubathworks.com
®
9
w h e r e w a t e r m e e t s m o d e r n ®
®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T 1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
freestanding toilet
fault diagnostic
LF1062 | LF1269 | LF8004
Problem/Symptom Cause Action/cure
Fill valve turns on/off without
toilet being flushed Flush valve seal gasket is dirty Inspect and clean flush valve seal gasket
Fill valve continuously running Dirty fill valve seal Shut off water supply. Open fill valve cap
and clean valve seal.
Poor flush Water supply is not fully open Open water supply valve
Toilet not flushing Water supply vavle is closed Open water supply valve
Push button is stuck Tank lid is misaligned Align the tank lid
Water supply pressure is too low The minimum required supply pressure
is 20 psi. Consult your plumber.
Trapway is obstructed Unclog trapway
Venting is obstructed Clean venting pipes
Flush valve seal gasket is dirty Inspect and clean flush valve seal gasket
1.
2.
3.
4.
5.
a)
a)
b)
a)
b)
c)
d)
a)
a)