Blu Bathworks TSP421 - Manual (Page 9)

2013-07
1 866 907 0122 blubathworks.com
®
8
MAINTENANCE
Diverter cartridge change and cleaning
To clean the filters:
•
Shut off the water supply to both inlets
• Remove the lever (1), remove the grub screw (2) with 2.5mm / 1 / 8 ” Alan key, remove the closure con-
trol knob (3).
• Remove the chrome ring (6).
• Unscrew flange (7) using 17mm / i¾" spanner.
• Remove the diverter cartridge (8).
• Before re-assembling cartridge clean its housing with wet cloth and grease “O” rings on cartridge.
• Place the new cartridge, inserting the two pivots into the corresponding seats.
• Fit the flange (7).
• Fit the chrome ring (6).
• Fit the element (5) and the screw (4).
• Fit the closure control knob (3).
• Fit the grub screw (2) and fit the lever (1).