BSS Audio sw9016 Install Guide - Manual (Page 4)

Soundweb 9016 Installation Guide
4
Soundweb
TM
Balanced wiring - The convention for balanced wiring (2-core plus shield) is:
Balanced connection 9016 connection
Pin 3 : Cold '-'
Pin 2 : Hot '+'
Pin 1 : Shield
Rear Panel Details
The 9016 audio and control connections are via Klippon (also known as BL, Phoenix or
Combicon) pluggable terminal block connectors.
12 x 6-way female Klippon connectors are supplied for making these connections.
For audio cables and looms, see the Product Overview 2000 catalogue from:
Direct Cable Systems Ltd.
Tel: (020) 7485 0899
www.directcable.co.uk
Phoenix-XLR audio cable P/N 100521
Unbalanced wiring - The convention for unbalanced wiring to the inputs (1-core plus
shield) is:
Unbalanced connection 9016 connection
Pin 1 : Shield
Pin 2 : Hot '+'
Pin 3 : Link to Pin 1
(Optional for 9016 inputs)
Mains inlet
IEC power connector, for connection to mains supply (100-270V AC, 50/60Hz).
Mains fuse holder
Requires a 20mm T1A type fuse. Do not replace with anything other than the recom-
mended fuse.