BSS Audio sw9016 Install Guide - Manual (Page 8)

Soundweb 9016 Installation Guide
8
Soundweb
TM
9016 Technical Specifications
Video Inputs 8 Composite Video inputs (CBVS or SVideo) on BNC
connectors with BNC loopthrough connectors
Video Standard PAL or NTSC (auto selected)
Video Bandwidth 150Mhz
Video Crosstalk <70dBR up to 10MHz
Sync Automatically either Channel 1 or ‘Sync’ input
Impedance 75 Ohm self-terminating
Routing 8x4 Video Matrix
Video Outputs 4 x 75Ohm Composite Video Outputs on BNC connectors
Audio Inputs 16 Balanced Audio inputs on Phoenix Combicon
removable screw connectors.
Routing 16x8 Audio Matrix, each channel independently addressable
Input Impedance 10kOhm
Maximum Input Level +20dBu
Input gain adjustable, -inf to +20dB (via PC App or 9012 in zone mode)
THD <0.02%
Frequency Response 20Hz-20kHz +0/-0.2dB
S/N Ratio >110dBR at unity gain
Crosstalk <-100dB
CMRR >40dBR
Audio Outputs 8 Balanced Audio Outputs on Phoenix/Combicon removable
screwconnectors.
Output gain adjustable, -inf to +20dB
Control & Presets
Presets 8 presets per video output zone when used with standalone PC
application
Serial Control Port RS-232 connects to Soundweb 9088ii, 9008ii, 9000 or 9000ii or
PC
Dimensions 2RU (3.5") high, 19" wide, 6.6" deep
(89mm x 445mm x 168mm)
Weight 3kg (6.6lbs) unpacked
BSS Audio have a policy of continued product improvement and accordingly reserve the right to change features and
specifications without prior notice.
BSS Audio
A Division of Harman International Industries Ltd
Cranborne House, Cranborne Road, Potters Bar, Herts EN6 3JN England
Tel +44 (0)1707 660667 Fax +44 (0)1707 660755 http://www.bss.co.uk
Part no. ZM10094-01 Feb 2002