BSS Audio sw9010 Install Guide - Manual (Page 8)

118
Soundweb
TM
Technical specifications
External Microphone Input External Microphone Input External Microphone Input External Microphone Input External Microphone Input
Frequency response (+-1dB) 20Hz to 20KHz
THD 0.05% (20Hz to 20KHz, +10dBu output)
Dynamic range 80dB typ. (22Hz to22KHz unweighted)
Gain control range 34 to 72dB
Maximum input level -20dBu
Input impedance 2k Ohm
Equivalent Input Noise -106dBu @150 Ohm
Audio Outputs Audio Outputs Audio Outputs Audio Outputs Audio Outputs
Frequency response (+-1dB) 20Hz to 20KHz
THD <0.05% (20Hz to 20KHz, 0dBu output)
Dynamic range 88dB typ. (22Hz to 22KHz
unweighted)
Maximum output level +4dBu
Output impedance 220 Ohm
Note - polarity is inverted to allow external headphone amplifier or line driver to be
inverting.
Control Ports
Control Ports Control Ports Control Ports Control Ports
Logic output voltage 0 or +5V unloaded
Logic output impedance 440 Ohm
Control input impedance 4.7kOhms to +5V
General General General General General
Maximum network cable length 300m/1000ft
Power consumption <5VA
(<200mA at 24V DC)