BUG-O Systems Piper-Plus - Manual (Page 11)

11
SECTION 3.0 DISPLAY SCREEN - MAIN SCREEN
This screen is displayed immediately upon turning on the Piper Plus.
Figure 3.1 – Main Screen
3.1 DISPLAY – This area displays a list of all folders available within the machine. Use the
MOUSE (See SECTION 2.4) to move the cursor over the required folder. Highlight selection
by clicking the Left Mouse button.
3.2 Run – Pressing this button will put the machine in RUN MODE. It will load the folder
highlighted in the DISPLAY (See SECTION 3.1). When the machine is idle, it is possible to
select a new pass. The first pass for a station will be loaded when the run screen is opened.
To select a new pass, use the pointer and click on the desired pass, or press the pass
change button on the pendant. Any adjustments that were made will be lost and the default
values will be loaded. The screen will change to the RUN screen as shown in SECTION 4.0 .
PLEASE NOTE: The system is not capable of any motion unless it is in RUN MODE.
This applies to both the jog and automatic modes.
3.1
3.2
3.3
3.4