BUG-O Systems Piper-Plus - Manual (Page 16)

16
3.1.8 Transfer to USB – This allows data to be transferred from the Control Box to a USB drive.
This data can then be loaded onto another system, saved on a PC or emailed anywhere it is
needed. When this button is clicked, a screen similar to the one in Figure 3.1.4 is displayed.
Enter the name of the new folder using the MOUSE (See 2.4) by hovering the cursor over
the desired letter and clicking on the LEFT mouse button. The SHIFT button can be used for
capital letters. Once the name is displayed in the text box, click on OK using the LEFT mouse
button. Once OK is clicked, the screen will remain for a short time while the data is written to
the USB drive. Once the data is written, the screen will disappear.
3.1.9 Transfer from USB – This function allows data stored in a PC or on a USB drive to be
transferred to the Control Box. This data must be from a similar system. ( Data from the
Bug-O Systems Piper-Bug cannot be transferred to the Piper-Plus.) A USB Drive that
contains a file folder with the necessary data must be plugged into the USB port (See Page
64, 65 – Item 32) When this button is clicked, the screen shown in Figure 3.1.9 appears. You
have two choices: Merge or Replace.
Figure 3.1.9 – Transfer from USB Screen
3.1.9.1
3.1.9.2
SECTION 3.1.0 DISPLAY SCREEN - MAIN SCREEN - ADMIN. FUNCTION ACTIVE