BUG-O Systems Piper-Plus - Manual (Page 36)

36
The Travel Tab will allow you to change the travel speed, delay, and reverse speed. The reverse speed
can be set to a value much higher than the forward travel speed to allow the operator to back it into
place quickly. The direction allows a pass to be created with vertical up or vertical down progression.
Figure 10.2
10.2.1 Travel Speed – This column provides the default data for the tractor travel speed. Travel
Speed is the speed the motor will move the machine while it is allowed to move.
10.2.2 Travel Delay – This value is the amount of time that the initiation of the tractor travel motion
will be delayed from the moment the start button is pressed.
10.2.3 Reverse Speed – This value is the tractor travel speed when the tractor is jogged in the
reverse direction.
10.2.4 Travel Direction – This is the default direction of travel for the tractor.
a. Vertical Up – If this button is selected, upon pressing start, the tractor will
proceed in an upward direction.
b. Vertical Down – If this button is selected, upon pressing start, the tractor will proceed
in a downward direction.
10.2.1 10.2.2 10.2.3
10.2.4
10.2.5
10.2.6
10.2.7
SECTION 10.2 TRAVEL TAB
b.
a.