Cabasse Оcean User Manual
Page 23
23. Validate the start of the last phase. It is possible to skip it by
confirming 0 dB on the next screen and come back directly to
this phase later on.
24. Test various settings between +4 dB and -6 dB. The final
setting should rarely exceed +1 dB.
25. Bravo, the protocol has been fully completed.
26. The
curve on the top right of the display confirms that
the CRCS module is active. This logo will now appear on every
screen.
27. Select «Back» and validate with the 1 button to close the
CRCS menu. Unplug and store the microphone. You are ready
for music.
1. Select «FUNCTION»,»PRESET», «CRCS» and validate «off»
with 1 .
2. Select «off» and validate.
3.To get the CRCS corrections back, select
«FUNCTION»,»PRESET», «CRCS» and validate «on» with 1 .
1.Once the CRCS module is active, it’s possible to access di-
rectly to the «Spectrum Adjustment» and skip the measurement
phases. Select «FUNCTION» followed by «PRESET» with the
1 button.
2.Select «CRCS» and validate.
3. Vaidate «on».
4. Listen to reference tracks and compare various settings
between -6 dB and +4dB. Validate with 1
when the right set-
ting is determined.
CRCS OFF / ON
SPECTRUM BALANCE ADJUSMENT
CAB ocean-v6.indd 23
10/10/11 11:29