Denon DVD-2930CI - Manual (Page 12)

Connections Connections
ENGLISH
9
ENGLISH
Connection to a TV
S VIDEO
IN
R
L
AUDIO IN
VIDEO
IN
or
R
L L
R
L
J
G
R
L
AUDIO IN
COMPONENT VIDEO IN
Y
P B
P R
R
L L
R
L
A
H
¢ For a TV equipped with a video input or S-Video input terminal
¢ For a TV equipped with component video input terminals
Digital connection to an AV amplifier with built-in decoder
COAXIAL
IN
OPTICAL
IN
or
C
D
When playing DVDs recorded in Dolby Digital or DTS, the Dolby Digital or DTS bitstream is output from
the DVD-2930CI’s digital audio output terminal.
By connecting the DVD-2930CI to an AV amplifier equipped with a built-in Dolby Digital or DTS decoder
you can achieve sound with a power and sense of presence like that of a movie theater or concert hall.
Match the shapes
• If the TV to which the player is to be connected is compatible with progressive scan video, connect to
the component video input terminals.
• The DVD-2930CI’s progressive output (525P) is compatible with Macrovision copy guard. With TVs that
are not compatible with the DVD-2930CI, the picture may be affected. In this case, set “COMPONENT
VIDEO OUT” at “VIDEO SETUP” to “INTERLACED”.
• For TVs not compatible with the progressive mode, set “COMPONENT VIDEO OUT” at “VIDEO
SETUP” to “INTERLACED”.
• When using an optical fiber cable (commercially
available), insert its plug fully in the proper
direction.
NOTE:
• Connect the DVD-2930CI’s video output either directly to the TV or indirectly via an AV amplifier. Do
not connect it via a VCR (video cassette recorder).
Some discs include copy prohibit signals. If such discs are played via a VCR, the copy guard system
may disturb the picture.
NOTE:
• Playing a DVD recorded in DTS when connected to an AV amplifier (decoder) that is not DTS
compatible could result in noise that is unpleasant on the ears and could damage the speakers.
Monitor
AV amplifier
Monitor