Denon DVD-2930CI - Manual (Page 35)

ENGLISH
ENGLISH
Basic Operation
32
Basic Operation
Turning the power on
Press <POWER> .
• “0h00m00s” is displayed if no disc is loaded.
¢ ON: The power indicator lights green.
£ OFF: The power indicator turns off.
The power indicator lights red if the standby mode is set by
pressing <ON STANDBY> or [POWER OFF].
[ POWER OFF ]
5
2 1
<POWER>
5 <ON/STANDBY> 1 2
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
¢ Turning the power off:
Press <POWER> again.
• When the power is turned off from the standby mode, it is set to the
standby mode when the power is turned back on.
NOTE:
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
Loading discs
Press 5 .
For instructions on loading discs, see page 4.
¢ To close the disc tray:
Press 5 again.
Playing discs
Press 1 .
• The “ 1 ” indicator lights and playback starts.
• For details, refer to the disc’s instructions.
Some discs may be designed by the software producer to operate
in ways other than described in this manual.
To stop playback
Press 2 .
• Playback stops and the wallpaper is displayed.
If “AUTO POWER MODE” at “OTHER SETUP” is set to “ON”
in the initial settings (
page 27), the power automatically
turns off and is set to the standby mode if the player is left in the
stop mode for about 30 minutes.
¢ Resume play memory function
If 2 is pressed during playback, the position at which the disc was
stopped is stored in the memory (“ 1 ” flashes on the display).
If 1 is pressed now, playback resumes from the point at which it was
stopped.
The resume play memory function is canceled if the disc tray is
opened or
2 is pressed again.
• The resume play memory function only functions for discs for which
the elapsed time is indicated on the display during playback.
• The resume play memory function does not function during menu
playback.