Connection of the power sup- ply cable – Caple C240SS User Manual
Page 39
35
Fig. 6.1
A
F
Fig. 6.2
230 V
PE
N
L
1
(L )
2
Fig. 6.3
CONNECTION OF THE POWER SUP-
PLY CABLE
Unhook the terminal board cover by
inserting a screwdriver into the two
hooks “A” (fig. 6.1).
Open the cable gland by unscrewing
screw “F” (fig. 6.2), unscrew the terminal
screws and remove the cable.
The new supply cable, of suitable type
and section, is connected to the terminal
board following the diagram fig. 6.3.
FEEDER CABLE SECTION TYPE HO5RR-F
230 V
3 x 1,5 mm
2
N.B. For connection to the mains, do not use adapters, reducers or branching
devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system call an expert.
He should also check that the socket cable section is suitable for the power absorbed
by the appliance.